Illustrator Tutorial: Create Football Helmet


[ad_1]

Illustrator Tutorial: Create Football Helmet

Tweet

football helmet

In the following steps, you will learn how to create a detailed football helmet illustration using Adobe Illustrator. The tools in which I will use in this actually tutorial include: Pen Tool (P), Ellipse Tool (L), Rounded Rectangle Tool along using also Direct Selection Tool (A). I ​​will also use the Pathfinder panel wthe itemh Clipping Mask along using also some effects (pen, Gaussian Blur, Shadow). Tutorial will take some time, although rest assured, you will not be dis actuallyappointed wthe itemh the end result. So let's get began!

Open a bralong with new document

1. Start Illustrator along using also press (Ctrl + N), to create a bralong with new document. Choose the pixel drop-down menu Unthe items, enter 530 inside the width along using also 400 inside the height of the press, click Advanced. Choice RGB, Screen (72ppi) along using also make sure in which align bralong with new objects to the pixel grid is actually cleared, before you click OK.

Creating a Key figure

2. Select the Ellipse Tool (L) along using also create two ellipses wthe itemh dimensions :. 297px 307px by 265px along using also 295px of

3. On the basis actually of thetwo black ellipses create a red object, as shown below.

4. Select the two black ellipses along using also remove them. Use the Pen Tool (P) create a blue object, as shown below. Once your object is actually drawn again two bralong with newly created objects along using also open the Pathfinder palette to (Window> Pathfinder), along using also then click on the Minus Front althoughton. Next, fill the resulting object wthe itemh a radial gradient as you can see inside the fourth image below.

5. Let us turn to the ear hole. Using the tool Pen Tool (P), create an object, as shown below. Once your object is actually drawn, duplicate (Ctrl + C, Ctrl + F) once. Now select the blue along using also red objects along using also then click on the Minus Front althoughton via the palette Pathfinder (Window> Pathfinder).

6. Select the remaining red object along using also go to Object> Path> Offset Path. Enter -2px Offset along using also click OK. Next, select two red objects along using also click on the Minus Front althoughton via the palette Pathfinder, along using also then fill the resulting object wthe itemh a radial gradient as you can see inside the second image below.

7. Use the Pen Tool (P) create two objects, as you can see inside the image below.

8. Fill a red object wthe itemh a radial gradient as shown below. Fill yellow object wthe itemh R = 14, G = 15, B = 19. Send two bralong with newly created form to back (Ctrl + Shift + left bracket Square).

9. It is actually time to pay the rest of the ear hole. Using the tool Pen Tool (P), create an object, as shown below. Choose a large form in which you created in step 8 along using also duplicate (Ctrl + C, Ctrl + F) the item. Keep duplicate selected, hold down Shift, along using also click on the red objects to open the Pathfinder palette (Window> Pathfinder). Press the Minus Front.

10. Use the Pen Tool (P), create two objects, as shown below. Once your objects are drawn, fill the red object wthe itemh a linear gradient as shown inside the third image below. Keep the resulting shape to select along using also move to Effect> Stylize> Feather. Enter the radius of 10px, along using also then click OK. Fill yellow object wthe itemh a linear gradient, as you can see inside the fourth picture.

11. Continue to work wthe itemh the Pen Tool (P). Create an object along using also fill the item wthe itemh the linear gradient shown below.

12. Continue to work wthe itemh the Pen Tool (P). Create an object, as you can see inside the image below. Once your object is actually drawn, fill the item wthe itemh a linear gradient. Then create a curved line as shown inside the third image along using also fill in this actually way wthe itemh anyone, along using also then add a 2px stroke (use a linear gradient for a stroke).

13. Duplicate (Ctrl + C , Ctrl + F) inside the form created in step 12, then go to Effect> Stylize> Shadow. Follow the data, as shown below, along using also then click OK. Now reselect the shape created in step 5, to duplicate (Ctrl + C, Ctrl + F), then bring to a duplicate (Ctrl + Shift + right bracket). Keep the item selected, hold down Shift, along using also click on the form wthe itemh the effect of shade. Go to Object> Clipping Mask> Make (Ctrl + 7).

14. Use the Pen Tool (P), create an object, as you can see the image below. Once your objects are drawn, along using also they re-open the palette Pathfinder (Window> Pathfinder), along using also then click on the Minus Front althoughton. Fill the resulting object wthe itemh a linear gradient as shown inside the fifth image. Keep the resulting shape of the selected open palette Transparency (Window> Transparency), set the blending mode to Screen along using also reduce the opacthe itemy to 80%. Finally, apply a 3px Feather effect for the resulting form.

15. Using the tool Pen Tool (P), create two objects, as shown inside the figures below. Once your objects are drawn, select a yellow object, along using also make a duplicate (Ctrl + C, Ctrl + F), along using also then hide the item (Ctrl + 3). Further, again, two bralong with new objects along using also fill them wthe itemh a linear gradient as shown inside the third image. Keep the resulting shape along using also go to the selected option Object> Blend> Blend. Follow the data, as you can see inside the fourth picture along using also click OK. Go to Object> Blend> Make (Ctrl + Alt + B).

16. Use the Pen Tool (P ), create a green along using also fill the item wthe itemh the linear gradient shown below. Make sure in which the resulting shape is actually still selected along using also go to Effect> Stylize> Feather. Enter the radius of 8px, along using also then click OK. Now press (Ctrl + Alt + 3) to show the yellow object is actually hidden in step 15. Hold down Shift, along using also click on the form created in this actually step. Go to Object> Clipping Mask> Make (Ctrl + 7).

17. To add some details to draw a curved line. Fill out this actually way wthe itemh anyone along using also add a 1px stroke (R = 109, G = 110, B = 113), along using also then apply the section width 3 for the resulting path. Continue using the Pen Tool (P). Create two ways, as you can see inside the third picture. After your way stretch, fill the red path wthe itemh none along using also add a 3px stroke (R = 35, G = 31, B = 32). Then fill the rest of the way wthe itemh anyone along using also add a 3px stroke (R = 121, G = 128, B = 138). Apply a 2px feather effect to the two bralong with newly-created tracks. Now select along using also group (Ctrl + G) all the objects created via the beginning to step 15, along using also then to hide this actually group behind the front of the helmet.

Create Antarctic

18. Let's start wthe itemh the creation of the chin cup. Use the Pen Tool (P), create two objects along using also fill the objects wthe itemh a radial gradient as shown inside the figures below. Next, hide the short form of the big form.

19. Using the tool Pen Tool (P ), create a curved line, along using also then fill out this actually way wthe itemh anyone along using also add a 3px stroke (R = 117, G = 122, B = 137). Duplicate (Ctrl + C, Ctrl + F) the bralong with newly created path. Then select the Add Anchor Point Tool (+) to add an anchor point at the selected red. Select the bralong with newly created anchor point along using also click on the "Cut path at selected reference points" althoughton on the property bar. This kind of actually makes the path to become two ways. Choose a long way, along using also replace the current stroke colour wthe itemh R = 255, G = 255, B = 255. Next, select the rest of the way along using also replace the current stroke colour wthe itemh R = 35, G = 31, B = 32. Finally, again two bralong with newly created paths along using also apply 3px feather effect to them.

20. Select the Pen Tool (P) along using also create two objects, as shown below. Once your objects are drawn, fill them wthe itemh a linear gradient.

21. Continue using the Pen Tool (P). Create two curved path as shown below. Next, fill inside the path of anyone along using also add a 1px stroke (use a linear gradient for the course), along using also then apply the section width 3 for the image paths.

22. Select the two shapes created in Step 20. Duplicate (Ctrl + C, Ctrl + F) along using also move them to the Effect > Stylize> Shadow. Follow the data, as shown below, along using also then click OK. Press (Ctrl + X), to reduce the resulting shape. Then double-click on the cut-off set created in step 13 along using also click (Ctrl + F), to insert the two figures. Finally, double-click anywhere outside of the set cut-off.

23. When using the Pen Tool (P), create an object along using also fill the item wthe itemh linear gradient, as shown below. Then create a curved line, as you can see inside the third picture. Fill out a bralong with new way to there, along using also add a 1px stroke (use a linear gradient for the course), along using also then apply the section width 3 for the resulting path.

24. To add some details to create an object, as shown below, along using also fill this actually place wthe itemh R = 53, G = 58 , B = 73. Press (Ctrl + Left bracket) twice to hide the shape of the two objects created in step 23.

25. Now, follow the sequence of images along using also to make some parts similar to those below.

26. Use the Pen Tool (P ), create an object along using also fill the item wthe itemh a linear gradient as you can see inside the image below. Continue to work wthe itemh the Pen Tool (P). Creating a curved line as shown inside the third image. Next, fill in this actually way wthe itemh anyone along using also add a 1px stroke (use a linear gradient for a stroke). Continue to create anvarious other object, as you can see inside the fifth image, then fill the item wthe itemh R = 36, G-41, B = 51.

27. Let's work towards a snap buckle. Select the Rounded Rectangle Tool along using also simply click on the Artboard. In the rounded rectangle, enter the data shown below, along using also then click OK. Then, use the Add Anchor Point Tool (+), add six reference points highlighted in blue along using also red, then click "Convert selected anchor points to smooth out" althoughton on the property bar. Now select the left point highlighted red along using also move the item 3px to the right. Select the right anchor point highlighted red along using also move the item 3px left. Finally, using the Direct Selection Tool (A) together wthe itemh the shift key, expalong using also halong using alsole two reference points you have just edthe itemed in order to get the results as shown inside the figure below the fifth image.

28. Select the bralong with newly created object along using also go to Object> Transform> Scale. Check Uniform along using also enter 82 inside the Scale field along using also then click Copy. Keep the bralong with new object is actually selected. Select the Add Anchor Point Tool (+), along using also add some control points are highlighted in yellow along using also red. Next, select all the reference points are highlighted in yellow along using also move them a bthe item. Now again two bralong with newly created objects along using also open the Pathfinder palette to (Window> Pathfinder), along using also then click on the Minus Front althoughton. Finally, fill the resulting object wthe itemh R = 96, G = 106, B = 116.

29. Select the form in which you created in step 28, along using also go to Object> Transform> Move. Enter 0.5px inside the Horizontal box, along using also enter 0.75px field vertically, along using also then click Copy. Replace the exis actuallyting colour the item wthe itemh R = 41, G = 44, B = 38.

30. Now, follow the sequence of images along using also to do some of the details are similar to those at the bottom.

31. Select along using also group (Ctrl + G) all objects created via step 27 By this actually time, then go to Object> Transform> Rotate. In the Rotate, enter -127 ° angle, along using also then click OK. Then place the resulting group in posthe itemion as shown inside the second image. Select the bralong with newly created group along using also go to Effect> Stylize> Drop Shadow. Follow the data, as shown below, along using also then click OK.

32. Duplicate (Ctrl + C, Ctrl + F) the bralong with new group along using also reduce size of the item. Place the item inside the correct posthe itemion, as you can see inside the second image below. At this actually point, your helmet should look like inside the second image.

Create a face mask

33. Use the Pen Tool (P), create a curved line as shown below. Once your path is actually drawn, fill the item wthe itemh none along using also add 9px stroke (linear gradient of stroke).

34. Select the anchor highlighted in red along using also click on the "Cut path at selected reference points" althoughton on the property bar. This kind of actually makes the path to become two ways. Next, select a shorter path along using also replace the current stroke colour the item wthe itemh a bralong with new linear gradient shown inside the second image. Now select a longer path ANDD duplicate (Ctrl + C, Ctrl + F) the item. Select anchor highlighted in red on the two copies along using also click on the "Cut path at selected reference points", along using also then remove the shortcut. Select the rest of the way along using also replace the current stroke colour the item wthe itemh a bralong with new linear gradient. Apply 4px Feather effect for the resulting path.

35. Select the path you created in step 33. Duplicate the item along using also go to Effect> Stylize> Shadow. Follow the data, as shown below, along using also then click OK.

36. Use the Pen Tool (P), create two ways, as you can see inside the image below. Next, select the two anchor points highlighted in yellow two bralong with new tracks along using also click on the althoughton "Connect selected end points" althoughton on the property bar. Finally, fill in a bralong with new way wthe itemh anyone along using also add a stroke 9px (apply a linear gradient through the course).

37. Select the two anchor points highlighted in red on a bralong with new path along using also click on " Cut path at selected points anchor "althoughton on the property bar. This kind of actually makes the path to become a three-way. Replace exis actuallyting colour shorter stroke two paths as shown inside the second image below. Finally, send the two ways you just edthe itemed at this actually stage to support (Ctrl + Shift + left square bracket).

38. Select the long path created in step 37, along using also make a duplicate (Ctrl + C, Ctrl + F) therein. Keep a duplicate of the selected. Select the Direct Selection Tool (A) along using also click on the anchor point is actually highlighted in red, along using also then click on the "Cut path at selected reference points" althoughton on the property bar. Next, select a shorter path along using also delete the item. Now, again left the path along using also replace the exis actuallyting stroke colour the item wthe itemh a bralong with new linear gradient, along using also then apply a 4px Feather effect for the resulting path.

39. Select the path you created in step 36, duplicate the item, along using also then go to Effect> Stylize> Drop Shadow. Follow the data, as shown below, along using also then click OK.

40. Select the form in which you created in step 5, press (Ctrl + C), to copy the item. Then click on the path you created in step 39 along using also click (Ctrl + F), to insert the item inside the front. Keep this actually copy selected. Hold down Shift, along using also click on the two bralong with new tracks wthe itemh the effect of shade. Go to Object> Clipping Mask> Make (Ctrl + 7).

41. Using the Pen Tool (P), create two curved paths as shown below. After your way stretch, fill the red path wthe itemh anyone along using also add 9px stroke (linear gradient of stroke). Then fill the rest of the way wthe itemh anyone along using also add a stroke 9px (apply a linear gradient through the course), along using also then send the resulting path to the back (Ctrl + Shift + left square bracket).

42. Continue using the Pen Tool (P). Create a curved line, as you can see inside the image below. Share!


[ad_2]
http://cheapestdigthe itemalart.com/Illustrator Tutorial: Create Football Helmet


http://mymicrostocksold.blogspot.co.id : Illustrator Tutorial: Create Football Helmet
Share on Google Plus

0 Response to " Illustrator Tutorial: Create Football Helmet "

Post a Comment